If you're considering dental implants, they'll need to be surgically placed in the jaw bone. But don't be alarmed — it's a relatively minor procedure that usually requires nothing more than local anesthesia.
But that being said, it's still an invasive procedure that involves making incisions in gum and bone tissues. That could introduce bacteria into the bloodstream and pose, for certain individuals, a slightly greater risk of infection.
But infection risk is quite low for most healthy patients. As a result, implants enjoy a greater than 95-percent success rate ten years after installation. But some patients have health issues that increase their risk of infection. These include older adults with a weakened immune system, smokers, diabetics or those well under or over their ideal weight.
If you have these or similar health situations, we may recommend undergoing an antibiotic treatment before you undergo surgery. This can help prevent bacteria from spreading and reduce the likelihood of an infection.
Preventive antibiotic therapy is commonplace with many other dental procedures. Both the American Dental Association and the American Heart Association recommend antibiotics before any invasive oral procedure for patients with prosthetic (false) heart valves, past endocarditis, a heart transplant or other heart conditions. To lower the risk of implant failure due to infection, we often advise antibiotics for patients who fall in these categories, as well as those with similar conditions mentioned earlier.
Of course, whether pre-surgical antibiotics is a wise choice for you will depend on your medical history and current health status. We'll consider all these factors thoroughly before advising you. But if you are more susceptible to infection, antibiotics before surgery could potentially lower your risk for an implant failure.
The movie Bohemian Rhapsody celebrates the iconic rock band Queen and its legendary lead vocalist, Freddie Mercury. But when we see pictures of the flamboyant singer, many fans both old and new may wonder—what made Freddie’s toothy smile look the way it did? Here’s the answer: The singer was born with four extra teeth at the back of his mouth, which caused his front teeth to be pushed forward, giving him a noticeable overbite.
The presence of extra teeth—more than 20 primary (baby) teeth or 32 adult teeth—is a relatively rare condition called hyperdontia. Sometimes this condition causes no trouble, and an extra tooth (or two) isn’t even recognized until the person has an oral examination. In other situations, hyperdontia can create problems in the mouth such as crowding, malocclusion (bad bite) and periodontal disease. That’s when treatment may be recommended.
Exactly what kind of treatment is needed? There’s a different answer for each individual, but in many cases the problem can be successfully resolved with tooth extraction (removal) and orthodontic treatment (such as braces). Some people may be concerned about having teeth removed, whether it’s for this problem or another issue. But in skilled hands, this procedure is routine and relatively painless.
Teeth aren’t set rigidly in the jawbone like posts in cement—they are actually held in place dynamically by a fibrous membrane called the periodontal ligament. With careful manipulation of the tooth, these fibers can be dislodged and the tooth can be easily extracted. Of course, you won’t feel this happening because extraction is done under anesthesia (often via a numbing shot). In addition, you may be given a sedative or anti-anxiety medication to help you relax during the procedure.
After extraction, some bone grafting material may be placed in the tooth socket and gauze may be applied to control bleeding; sutures (stitches) are sometimes used as well. You’ll receive instructions on medication and post-extraction care before you go home. While you will probably feel discomfort in the area right after the procedure, in a week or so the healing process will be well underway.
Sometimes, dental problems like hyperdontia need immediate treatment because they can negatively affect your overall health; at other times, the issue may be mainly cosmetic. Freddie Mercury declined treatment because he was afraid dental work might interfere with his vocal range. But the decision to change the way your smile looks is up to you; after an examination, we can help you determine what treatment options are appropriate for your own situation.
If you have questions about tooth extraction or orthodontics, please contact our office or schedule a consultation. You can read more in the Dear Doctor magazine articles “Simple Tooth Extraction” and “The Magic of Orthodontics.”
Drilling teeth is an essential part of repairing and restoring the damage caused by tooth decay. For generations dentists have relied on the dental drill with its rotating burr to remove decayed and damaged tooth material.
But while the dental drill is effective it also has its disadvantages. In the process of removing decayed material it inadvertently removes healthy structure near the target material. It often requires anesthesia to deaden the work area. And its noise and vibration are often unsettling to patients.
There is a growing alternative, though: air abrasion, a technology that's been around since the mid-20th Century. But recent advances in controlling the dust created by using abrasion, as well as new tooth-colored bonding materials to replace tooth structure, have sparked new interest among dentists and patients alike.
Also known as particle abrasion, this drill alternative uses a pressurized stream of fine particles to remove decayed material. Using a hand wand a dentist can precisely aim the stream of particles (usually aluminum oxide) to the specific areas of decay or softened material that need to be removed. As a result, it removes only a fraction of healthy tooth structure compared to traditional drilling. Air abrasion has also proven effective for removing staining without harming enamel.
Air abrasion also eliminates the sound and vibration associated with dental drills, and may not always require local anesthesia. On the other hand, it does have some limitations. For one, it's not as effective with larger cavities or working around older fillings. The tooth or teeth to be worked on must be carefully isolated from the rest of the mouth to keep the patient from swallowing the abrasive particles. And without a high-volume suction pump and good isolation protocols, the particles can produce something of a “sandstorm” in the treatment room.
But as air abrasion continues to advance, we may see improvements in these limitations. In a future time, the traditional dental drill may go the way of the horse and buggy.
If you would like more information on air abrasion as an alternative to drilling, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Air Abrasion Technology.”
One of the unfortunate aspects of aging is tooth wear. Depending on your diet, years of biting and chewing can cause enamel along the biting surfaces to erode. Your body also can't replace enamel — so when it comes to teeth it's not a question of if, but how much your teeth will wear during your lifetime.
To make matters worse, certain conditions cause tooth wear to accelerate. Teeth softened by acids or tooth decay, for example, erode faster than healthier teeth. So will grinding habits: often fueled by stress, these include chewing on hard items like nails, pencils or bobby pins.
You may also grind your teeth, usually while you sleep. Normal biting and chewing produces pressure of about 13 to 23 pounds per square inch: grinding your teeth at night can well exceed this, even up into the hundreds of pounds.
There are some things we can do to alleviate these issues. For clenching and grinding habits, one primary step is to address stress through counseling or biofeedback therapy. For nighttime teeth grinding we can create a bite guard to wear while you sleep that will prevent your teeth from generating abnormal forces.
Finally, it's important that you take care of your teeth through daily oral hygiene, regular office cleanings and checkups, and a nutritious diet for maintaining strong bones and teeth. Keeping your teeth free from diseases that could compromise your enamel as well as other aspects of your mouth will help them stay as strong as possible.
If you would like more information on slowing the rate of tooth wear as you age, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How and Why Teeth Wear.”
Modern dental care wouldn’t be the same without x-rays. Since dentists began capturing x-ray images a century ago to detect beginning tooth decay, billions of teeth have been preserved.
“Catching it early” is the key to staying ahead of this aggressive bacterial infection. Once it breaks through the protective defenses of tooth enamel, it can advance toward the center of the tooth, the pulp, damaging dentin as it goes. While we can effectively stop it at this point with a root canal treatment, it’s better for the tooth’s long-term health to detect and treat any decay early on with a less-invasive filling or other treatment method.
X-ray imaging helps make that possible, revealing decay much easier than we can see with the unaided eye. And while we can often detect decay in front teeth by visual examination or by using very bright lighting, that’s not as easy with the less accessible back teeth. For those teeth we use a special x-ray technique known as the bitewing.
The name comes from the small frame used to hold the film. It’s held in place in the mouth by the patient biting down on small tabs or “wings” extending from the frame. The x-ray beam travels through the outer cheek and teeth to the film being held in the frame on the back side of the teeth. When exposed, we’ll be able to view the interior of these back teeth: a set of four bitewings gives us a full view of all the upper and lower molars and pre-molars on each side of the jaws.
Like other forms of radiation energy, too much or too frequent exposures to x-rays can lead to serious health problems. But bitewing x-rays carry little risk to health. That’s because they fit well with the ALARA principle, meaning “As Low As Reasonably Achievable,” which helps guide our use of x-rays. Patients receive a fraction of the radiation exposure from routine bitewing x-rays than they receive annually from the natural environment.
Without bitewing x-rays and other diagnostic methods, the chances are high that tooth decay or other dental problems can go undetected in their early stages. Using this important tool can help us head off major damage before it occurs.
If you would like more information on the role of x-rays in dental care, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Bitewing X-Rays: A Routine Part of Your Dental Exam.”
This website includes materials that are protected by copyright, or other proprietary rights. Transmission or reproduction of protected items beyond that allowed by fair use, as defined in the copyright laws, requires the written permission of the copyright owners.